sys-unconfig doesn't work after reboot Post: 302315050

10 More Discussions You Might Find Interesting

1. IP Networking

Network problem after sys-unconfig

I am running Solaris 8 and I have problem with configuration of the network after running sys-unconfig command: - I ran "sys-unconfig" command then the system reboot to "ok" prompt. I did a "boot disk" command and the system reboot - I lost all system info including host name and all addresses...

2. UNIX for Dummies Questions & Answers

login error after sys-unconfig, errno = 13

Hi, I have a SPARCstation 10 with SunOS 5.6 This erlier was in a network and now I have it at home to make a webserver. At fist there was NIS and things left from erlier. So the "Console login:" newer appered only the white window with sun logo topleft and some text info. I made...

3. Solaris

[need help] about after running sys-unconfig and config network for v890

hi expert, i had do sys-unconfig for my v890 sparc and had config for eri0 network interface and hostname but after the server bring up i got this error messages : NIS domainname is www.USSDGmdn-4.com starting rpc services: rpcbind keyserv done. Setting netmask of eri0 to 255.255.255.0...

4. UNIX for Dummies Questions & Answers

Script doesn't work, but commands inside work

Howdie everyone... I have a shell script RemoveFiles.sh Inside this file, it only has two commands as below: rm -f ../../reportToday/temp/* rm -f ../../report/* My problem is that when i execute this script, nothing happened. Files remained unremoved. I don't see any error message as it...

5. Solaris

sys-unconfig keeps hostname

Hi, I performed a sys-unconfig on a solaris 10 server twice and it did not ask for a new hostname. I did a fresh install. most of the time I have experienced that it asks for a new hostname. what happened? I know I could have edited some files but I prefer not to. thanks in advance, ~jv

6. Solaris

question about sys-unconfig

Hi there, We are trying to move our Sun Solaris 10 servers to new location (different state); the subnets will be changing ofcourse and so will the IP addresses; we plan to change hostname too. Questions: 1)If we perform sys-unconfig will the current installed application/data be lost? If so,...

7. UNIX for Dummies Questions & Answers

Solaris 10 sys-unconfig issue (brand new user)

ok, Newbie here..... I just installed this solaris 10 for a class I'm taking. We couldn't figure out how to change the IP so we were told to just do it from the sys-uncofig process. Well, after I did that, I lost the GUI witch isn't all that bad cuz I want to learn the cli anyways, but I keep...

8. Solaris

sys-unconfig now can not log in

I did a sys-unconfig to change the domainname, Ip, subnet, hostname, and pretty much everything else that sys-unconfig handles. Upon reboot, it is toast. I did this all without the network cable plugged in. The following shows up on console: login: pam_unix_cred: cannot load ttyname Error 0 ...

9. HP-UX

How to remove swap file sys without reboot?

hi every body i am trying to remove logical volume i configured as a swap device but when i removed by smh i ran " swapinfo" it keeps the device and didn't feel that device removed also i "lvremove /dev/vg01/swapvol" also swapinfo not feel i want it feel that i reduced the swap without reboot...

10. Emergency UNIX and Linux Support

Reboot does not work after update

Hi guys, thanks for your help. I recently did a yum update on my rhel6.4 server. After this update, user logins take for ever and the reboot command does not work. When I do a reboot, the server hangs. Nothing happens. Any help with this will be appreciated. Thank you

LEARN ABOUT HPUX

reboot

reboot(2)							System Calls Manual							 reboot(2)

NAME

       reboot - boot the system

SYNOPSIS

DESCRIPTION

       causes the system to reboot.  howto is a mask of reboot options (see specified as follows:

	      A file system sync is performed (unless
				  is set) and the processor is rebooted from the default device and file.

	      The processor is simply halted.
				  A sync of the file system is performed unless the flag is set.  should be used with caution.

	      On systems with cellular architecture, all cells in the partition are
				  rebooted  in order to reconfigure the stable complex configuration data.  On systems with non-cellular architec-
				  ture, the default is A sync of the file system is performed unless the flag is set.

	      Shut down the system firmware to a "ready to reconfigure" state and do not
				  reboot.  This option can be used only in combination with

	      A sync of the file system is not performed.

       Unless the flag has been specified, reboot(2) unmounts all mounted file systems and marks them clean so that it will not  be  necessary	to
       run fsck(1M) on these file systems when the system reboots.

       Only users with appropriate privileges can reboot a machine.

RETURN VALUE

       If successful, this call never returns.	Otherwise, a -1 is returned and is set to indicate the error.

ERRORS

       fails if this condition is encountered:

	      [EPERM]		  The effective user ID of the caller is not a user with appropriate privileges.

DEPENDENCIES

       The default file and device for is on the current root device.

AUTHOR

       was developed by HP and the University of California, Berkeley.

SEE ALSO

       reboot(1M), privileges(5).

																	 reboot(2)

10 More Discussions You Might Find Interesting

1. IP Networking

Network problem after sys-unconfig

Discussion started by: rachael

2. UNIX for Dummies Questions & Answers

login error after sys-unconfig, errno = 13

Discussion started by: roing

3. Solaris

[need help] about after running sys-unconfig and config network for v890

Discussion started by: bucci

4. UNIX for Dummies Questions & Answers

Script doesn't work, but commands inside work

Discussion started by: cheongww