Sponsored Content
Operating Systems Linux Gentoo cpu%/mem% usage, scripting, dzen2: howto learn bash the hard way Post 302225918 by broli on Sunday 17th of August 2008 06:40:48 PM
Old 08-17-2008
i have been reading about how to sort arrays. and now i understand why you did this
Code:
NR > 5 { mem[$12] = $10; }

but the problem is, how do i print the array index ?
i need $12 later on

until i can fix that "retieval" of the value, i dont see how to integrate the memory calculation into the next awk

altho i have integrated the cpu part in one awk, and only that, nor more exhos Smilie

im gettign there Smilie
Code:
#!/bin/bash

while :
do
	top -b -n 1 > /tmp/salidatop
	
	awk '	NR==3 { printf "^fg(green)CPU %2.f%% ** ",$5 } \
		NR==8, NR==12 { printf "[^fg(cyan)%s(^fg(red)%s^fg(green)]--",$12,$9 } \
		END { print ">>" } ' /tmp/salidatop

	memper=$(awk 'NR==4 { total=$2; free=$6; buffers=$8}
			NR==5 { cached=$8 }

			END {   
	        	sub( "k","",total)
		        sub( "k","",free)
			sub( "k","",buffers)
			sub( "k","",cached)

			suma = free + buffers + cached
			porcentaje = (suma * 100) / total
			printf "%2.f\n",porcentaje }' /tmp/salidatop)

	echo -n "^fg(green)MEM $memper% ** "
	sort -r -n -k10 /tmp/salidatop | awk 'NR<=5 { printf "[^fg(cyan)%s(^fg(red)%s^fg(green)]--",$12,$10 } \
						END { print ">>" } ' 

	sleep 4

done | dzen2 -ta l -u -l 1 -x 20 -y 710 -w 660 -e 'onstart=lower,uncollapse'

 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Difference in Mem usage ?

Hi All, I have a pair of sun ultra 5_10 with SunOS 5.5.1. Both are almost equally patched and set up with simillar applications. host# uname -a SunOS host 5.5.1 Generic_103640-24 sun4u sparc SUNW,Ultra-5_10 Even though both have same amount of RAM ( 512 Mb ) , ... (1 Reply)
Discussion started by: shibz
1 Replies

2. Linux

High Mem & Cpu Utilisation

Hi All, Kindly help me in optimizing the server as it displays a great amount of CPU & MEM being utilised when the mysql process executes. Below are the stats --- -------------------------------------------------------------------------- # top 15:51:57 up 23:22, 5 users, load average:... (1 Reply)
Discussion started by: gautamatul82
1 Replies

3. Linux

Linux Mem Usage

What is amount of free RAM i have now? total used free shared buffers cached Mem: 1010 963 46 0 215 256 -/+ buffers/cache: 491 518 Swap: 1983 0 1983 Above is the output of... (1 Reply)
Discussion started by: new2ss
1 Replies

4. HP-UX

how can I find cpu usage memory usage swap usage and logical volume usage

how can I find cpu usage memory usage swap usage and I want to know CPU usage above X% and contiue Y times and memory usage above X % and contiue Y times my final destination is monitor process logical volume usage above X % and number of Logical voluage above can I not to... (3 Replies)
Discussion started by: alert0919
3 Replies

5. AIX

How to monitor the IBM AIX server for I/O usage,memory usage,CPU usage,network..?

How to monitor the IBM AIX server for I/O usage, memory usage, CPU usage, network usage, storage usage? (3 Replies)
Discussion started by: laknar
3 Replies

6. Shell Programming and Scripting

Help with bash script - Need to get CPU usage as a percentage

I'm writing a bash script to log some selections from a sensors output (core temp, mb temp, etc.) and I would also like to have the current cpu usage as a percentage. I have no idea how to go about getting it in a form that a bash script can use. For example, I would simply look in the output of... (3 Replies)
Discussion started by: graysky
3 Replies

7. UNIX for Dummies Questions & Answers

HOWTO - Total memory and CPU usage ... without top?

Hi all, Is it possible to get total memory usage and free memory usage without top? By Googling I found for total memory usage, use vmstat, for CPU, use mpstat, for disk I/O use iostat, is this correct? Will using sar gives the same result as ALL of these three (3) commands? What about if I... (2 Replies)
Discussion started by: newbie_01
2 Replies

8. Shell Programming and Scripting

Should I learn bash scripting or is it going obsolete?

Hi folks, I'm a CS students enrolled in a sysadmin class where we've been covering bash scripting for the past few weeks. I have prior knowledge in java, c++, c#, python,and some scripting languages like asp.net w/c# and php. This bash stuff seems pretty neat and a bit different than what I am... (9 Replies)
Discussion started by: KalEl
9 Replies

9. Shell Programming and Scripting

Command to find total cpu and mem

Hi All, I need to know the command for knowing the total cpu and mem. Thanks (5 Replies)
Discussion started by: aish11
5 Replies

10. UNIX for Dummies Questions & Answers

Learn bash shell scripting

I do not know shell scripting. But at work place, I have got an in and out shell scripting task. I just need to understand a very big script. Is there any tool in which I can place the script and it can tell me the meaning of the whole script? (3 Replies)
Discussion started by: lg123
3 Replies
A2P(1)							 Perl Programmers Reference Guide						    A2P(1)

NAME
a2p - Awk to Perl translator SYNOPSIS
a2p [options] [filename] DESCRIPTION
A2p takes an awk script specified on the command line (or from standard input) and produces a comparable perl script on the standard output. OPTIONS Options include: -D<number> sets debugging flags. -F<character> tells a2p that this awk script is always invoked with this -F switch. -n<fieldlist> specifies the names of the input fields if input does not have to be split into an array. If you were translating an awk script that processes the password file, you might say: a2p -7 -nlogin.password.uid.gid.gcos.shell.home Any delimiter can be used to separate the field names. -<number> causes a2p to assume that input will always have that many fields. -o tells a2p to use old awk behavior. The only current differences are: o Old awk always has a line loop, even if there are no line actions, whereas new awk does not. o In old awk, sprintf is extremely greedy about its arguments. For example, given the statement print sprintf(some_args), extra_args; old awk considers extra_args to be arguments to "sprintf"; new awk considers them arguments to "print". "Considerations" A2p cannot do as good a job translating as a human would, but it usually does pretty well. There are some areas where you may want to examine the perl script produced and tweak it some. Here are some of them, in no particular order. There is an awk idiom of putting int() around a string expression to force numeric interpretation, even though the argument is always integer anyway. This is generally unneeded in perl, but a2p can't tell if the argument is always going to be integer, so it leaves it in. You may wish to remove it. Perl differentiates numeric comparison from string comparison. Awk has one operator for both that decides at run time which comparison to do. A2p does not try to do a complete job of awk emulation at this point. Instead it guesses which one you want. It's almost always right, but it can be spoofed. All such guesses are marked with the comment ""#???"". You should go through and check them. You might want to run at least once with the -w switch to perl, which will warn you if you use == where you should have used eq. Perl does not attempt to emulate the behavior of awk in which nonexistent array elements spring into existence simply by being referenced. If somehow you are relying on this mechanism to create null entries for a subsequent for...in, they won't be there in perl. If a2p makes a split line that assigns to a list of variables that looks like (Fld1, Fld2, Fld3...) you may want to rerun a2p using the -n option mentioned above. This will let you name the fields throughout the script. If it splits to an array instead, the script is probably referring to the number of fields somewhere. The exit statement in awk doesn't necessarily exit; it goes to the END block if there is one. Awk scripts that do contortions within the END block to bypass the block under such circumstances can be simplified by removing the conditional in the END block and just exiting directly from the perl script. Perl has two kinds of array, numerically-indexed and associative. Perl associative arrays are called "hashes". Awk arrays are usually translated to hashes, but if you happen to know that the index is always going to be numeric you could change the {...} to [...]. Iteration over a hash is done using the keys() function, but iteration over an array is NOT. You might need to modify any loop that iterates over such an array. Awk starts by assuming OFMT has the value %.6g. Perl starts by assuming its equivalent, $#, to have the value %.20g. You'll want to set $# explicitly if you use the default value of OFMT. Near the top of the line loop will be the split operation that is implicit in the awk script. There are times when you can move this down past some conditionals that test the entire record so that the split is not done as often. For aesthetic reasons you may wish to change index variables from being 1-based (awk style) to 0-based (Perl style). Be sure to change all operations the variable is involved in to match. Cute comments that say "# Here is a workaround because awk is dumb" are passed through unmodified. Awk scripts are often embedded in a shell script that pipes stuff into and out of awk. Often the shell script wrapper can be incorporated into the perl script, since perl can start up pipes into and out of itself, and can do other things that awk can't do by itself. Scripts that refer to the special variables RSTART and RLENGTH can often be simplified by referring to the variables $`, $& and $', as long as they are within the scope of the pattern match that sets them. The produced perl script may have subroutines defined to deal with awk's semantics regarding getline and print. Since a2p usually picks correctness over efficiency. it is almost always possible to rewrite such code to be more efficient by discarding the semantic sugar. For efficiency, you may wish to remove the keyword from any return statement that is the last statement executed in a subroutine. A2p catches the most common case, but doesn't analyze embedded blocks for subtler cases. ARGV[0] translates to $ARGV0, but ARGV[n] translates to $ARGV[$n-1]. A loop that tries to iterate over ARGV[0] won't find it. ENVIRONMENT
A2p uses no environment variables. AUTHOR
Larry Wall <larry@wall.org> FILES
SEE ALSO
perl The perl compiler/interpreter s2p sed to perl translator DIAGNOSTICS
BUGS
It would be possible to emulate awk's behavior in selecting string versus numeric operations at run time by inspection of the operands, but it would be gross and inefficient. Besides, a2p almost always guesses right. Storage for the awk syntax tree is currently static, and can run out. perl v5.14.2 2010-12-30 A2P(1)
All times are GMT -4. The time now is 02:49 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy