we got our first Itanium server, and was wondering if the cpu sequence listed below is normal?
rx8640, running 11.31
Code:
System: myBOX Tue Mar 25 07:21:45 2008
Load averages: 0.00, 0.00, 0.00
219 processes: 187 sleeping, 31 running, 1 zombie
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.00 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
1 0.01 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
3 0.00 0.2% 0.0% 1.0% 98.8% 0.0% 0.0% 0.0% 0.0%
4 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
5 0.01 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
7 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
16 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
17 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
18 0.00 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
19 0.01 0.0% 0.0% 1.0% 99.0% 0.0% 0.0% 0.0% 0.0%
20 0.02 0.0% 0.0% 1.0% 99.0% 0.0% 0.0% 0.0% 0.0%
21 0.02 0.0% 0.0% 1.0% 99.0% 0.0% 0.0% 0.0% 0.0%
22 0.01 0.0% 0.0% 0.8% 99.2% 0.0% 0.0% 0.0% 0.0%
23 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
32 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
33 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
34 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
35 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
36 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
37 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
38 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
39 0.00 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
--- ---- ----- ----- ----- ----- ----- ----- ----- -----
avg 0.00 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
System Page Size: 4Kbytes
Memory: 325872K (222640K) real, 1154380K (983264K) virtual, 42263888K free Page# 1/9
I opened a case w/HP and they gave me some math formula which explains the cpu sequence jumps.
So I guess I'm looking for a confirmation that support isn't reaching :P
single partition, nothing special...parstatus output:
[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status MP
=== ============ ========= ========= ========== ============ ======
0 4 cell slot 21/0/N+ 6/0/N+ 6/0/N+ - Active
Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
HO = Housekeeping only; The power is in a standby state.
NA = Not Applicable.
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core 8/0/8 16.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Base 8/0/8 16.0/0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell2 Active Base 8/0/8 16.0/0.0 - no yes 0
cab0,cell3 Absent * - - - - - -
Notes: * = Cell has no interleaved memory.
found that SPU_LIST matches top output:
# psrset -i
PSET 0
SPU_LIST 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 32 33 34 35 36 37 38 39
OWNID 0
GRPID 0
PERM 755
IOINTR ALLOW
NONEMPTY DFLTPSET
EMPTY FAIL
LASTSPU DFLTPSET
LDOM_LIST 0 1 2
RTE DISALLOW
LCPU OFF
another interesting item, are these fab_cpu_hwpath messages found in dmesg:
fab_cpu_hwpath returned 22 for cpu_id 8
fab_cpu_hwpath returned 22 for cpu_id 9
fab_cpu_hwpath returned 22 for cpu_id 10
fab_cpu_hwpath returned 22 for cpu_id 11
fab_cpu_hwpath returned 22 for cpu_id 12
fab_cpu_hwpath returned 22 for cpu_id 13
fab_cpu_hwpath returned 22 for cpu_id 14
fab_cpu_hwpath returned 22 for cpu_id 15
fab_cpu_hwpath returned 22 for cpu_id 24
fab_cpu_hwpath returned 22 for cpu_id 25
fab_cpu_hwpath returned 22 for cpu_id 26
fab_cpu_hwpath returned 22 for cpu_id 27
fab_cpu_hwpath returned 22 for cpu_id 28
fab_cpu_hwpath returned 22 for cpu_id 29
fab_cpu_hwpath returned 22 for cpu_id 30
fab_cpu_hwpath returned 22 for cpu_id 31
fab_cpu_hwpath returned 22 for cpu_id 40
fab_cpu_hwpath returned 22 for cpu_id 41
fab_cpu_hwpath returned 22 for cpu_id 42
fab_cpu_hwpath returned 22 for cpu_id 43
fab_cpu_hwpath returned 22 for cpu_id 44
fab_cpu_hwpath returned 22 for cpu_id 45
fab_cpu_hwpath returned 22 for cpu_id 46
fab_cpu_hwpath returned 22 for cpu_id 47
Wouldn't it be great if I could resolve any issues before the box becomes production?
thanks,
manny
