Hello,

I'm having some issues with installing SCSI tape drive on SCO 5.0.6

hardware config shows the following adapters

%adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto
%adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd
%adapter - 3 - type=amird ha=0 id=7

I think the scsi device is connected to alad.

anyway

I went through mkdev tape

device adapter (0-4) - 0 for first
bus - 0
targerid - 6
lun - default 0

rebuild kernel and add new kernel

The device is still not picking up.

Is there anything I'm missing out here?

Would it be a problem with the SCSI card?
The SCSI Card is PCI and was supplied by DELL when the machine was bought.

Regards

Ananth