Hi Pressy,

Heres the result of iostat -En

# iostat -En
c0t1d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST34520LC Revision: 1483 Serial No:
Size: 4.54GB <4536791040 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c0t3d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST34371W Revision: 0532 Serial No:
Size: 4.35GB <4349030400 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c0t6d0 Soft Errors: 2 Hard Errors: 0 Transport Errors: 0

Vendor: TOSHIBA Product: XM-4101TASUNSLCD Revision: 1084 Serial No: 04/18/94
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 2 Predictive Failure Analysis: 0
rmt/0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: DEC Product: DLT2000 15/30 GB Revision: 840B Serial No: a


here is also the result when I execute the df -k command
df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t3d0s0 2193251 959997 1189389 45% /
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
swap 678460 16 678444 1% /var/run
swap 678744 300 678444 1% /tmp
/dev/dsk/c0t3d0s7 1434346 9 1376964 1% /export/home

How i able to mount the second drive, by the way the second drive has a data on it thats why I need to have this mounted so that i can see it

Thansk very much